mirrors/cheat-sheets
1
0
Fork 0
mirror of https://github.com/yuriskinfo/cheat-sheets.git synced 2025-12-21 21:33:25 +01:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #5 from yuriskinfo/next

Browse Source 
RAD ETX additions, Added MAC learning table command for RAD ETX and fixes on ETX as well.
This commit is contained in:
Yuri Slobodyanyuk
2022-11-22 18:33:16 +02:00
committed by GitHub
parent 3ad96766b4 44375b4d96
commit 25cf53912c
1 changed files with 18 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

19
cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc
View File

@@ -58,7 +58,9 @@ _Ping sender:_
service-ping local-ip 13.13.13.1/30 dst-ip 13.13.13.2 next-hop 13.13.13.2 egress-port ethernet 4/1 vlan 777 number-of-packets 10 payload-size 1450 service-ping local-ip 13.13.13.1/30 dst-ip 13.13.13.2 next-hop 13.13.13.2 egress-port ethernet 4/1 vlan 777 number-of-packets 10 payload-size 1450
|Send ping over the client vlan (here 777) from ETX to ETX to measure latency and packet loss. You configure one ETX as responder and another one as sender. |Send ping over the client vlan in Service Provider network (here 777) from ETX
to ETX to measure latency and packet loss. You configure one ETX as a responder
and another one as a sender.
|*show configure flows summary brief* |*show configure flows summary brief*
|List all flows configured on this ETX briefly |List all flows configured on this ETX briefly
@@ -66,6 +68,21 @@ service-ping local-ip 13.13.13.1/30 dst-ip 13.13.13.2 next-hop 13.13.13.2 egress
|*show configure flows summary details* |*show configure flows summary details*
|List all flows configured on this ETX with details |List all flows configured on this ETX with details
|*config flow _name_*
*mac-learning*
*show mac-table*
*no mac-learning*
|Enable MAC address learning inside a flow and show the MAC table. The _flow_ should be the one where
those MAC addresses are supposed to be learned, and in the appropriate
direction. E.g. if the equipment of the end client is connected to ETX port
`ethernet 0/10`, then you should run this command under the flow that has
`ingress port 0/10`, to see if the ETX can see client's equipment. WARNING:
after showing the results, make sure to disable the MAC learning, as it may
interfere with the client's traffic.
|*show config system system-date* |*show config system system-date*
| Show system time of the appliance, important for logs/alarms correlation. | Show system time of the appliance, important for logs/alarms correlation.