From e92cf99540dc93571f75461526f7ba0973f1d735 Mon Sep 17 00:00:00 2001 From: Yuri Slobodyanyuk Date: Wed, 16 Nov 2022 15:49:42 +0000 Subject: [PATCH 1/4] ETX mac-table addition --- ...ebug-and-information-commands-cheat-sheet.adoc | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc b/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc index cb6a6de..45936a9 100644 --- a/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc +++ b/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc @@ -66,6 +66,21 @@ service-ping local-ip 13.13.13.1/30 dst-ip 13.13.13.2 next-hop 13.13.13.2 egress |*show configure flows summary details* |List all flows configured on this ETX with details +|*config flow _name_* + +*mac-learning* + +*show mac-table* + +*no mac-learning* +|Enable MAC address learning inside a flow. The _flow_ should be the one where +those MAC addresses are supposed to be learned, and in the appropriate +direction. E.g. if the equipment of the end client is connected to ETX port +`ethernet 0/10`, then you should run this command under the flow that has +`ingress port 0/10`, to see if the ETX can see client's equipment. WARNING: +after showing the results, make sure to disable the MAC learning, as it may +interfere with the client's traffic. + |*show config system system-date* | Show system time of the appliance, important for logs/alarms correlation. From 5ff97e8839ba6dc4febbb0d81719bb4e0274ba50 Mon Sep 17 00:00:00 2001 From: Yuri Slobodyanyuk Date: Wed, 16 Nov 2022 15:52:09 +0000 Subject: [PATCH 2/4] ETX mac-table addition --- ...03-205-220-debug-and-information-commands-cheat-sheet.adoc | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc b/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc index 45936a9..47bc8cc 100644 --- a/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc +++ b/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc @@ -58,7 +58,9 @@ _Ping sender:_ service-ping local-ip 13.13.13.1/30 dst-ip 13.13.13.2 next-hop 13.13.13.2 egress-port ethernet 4/1 vlan 777 number-of-packets 10 payload-size 1450 -|Send ping over the client vlan (here 777) from ETX to ETX to measure latency and packet loss. You configure one ETX as responder and another one as sender. +|Send ping over the client vlan in Service Provider netwrok (here 777) from ETX +to ETX to measure latency and packet loss. You configure one ETX as a responder +and another one as a sender. |*show configure flows summary brief* |List all flows configured on this ETX briefly From 762f86b9edbedabd9dbc7a9b9db55938616b2f73 Mon Sep 17 00:00:00 2001 From: Yuri Slobodyanyuk Date: Wed, 16 Nov 2022 15:52:45 +0000 Subject: [PATCH 3/4] ETX mac-table addition --- ...-203-205-220-debug-and-information-commands-cheat-sheet.adoc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc b/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc index 47bc8cc..ce0e1eb 100644 --- a/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc +++ b/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc @@ -58,7 +58,7 @@ _Ping sender:_ service-ping local-ip 13.13.13.1/30 dst-ip 13.13.13.2 next-hop 13.13.13.2 egress-port ethernet 4/1 vlan 777 number-of-packets 10 payload-size 1450 -|Send ping over the client vlan in Service Provider netwrok (here 777) from ETX +|Send ping over the client vlan in Service Provider network (here 777) from ETX to ETX to measure latency and packet loss. You configure one ETX as a responder and another one as a sender. From 44375b4d96ca7e2db3a43fb37718433badcacea4 Mon Sep 17 00:00:00 2001 From: Yuri Slobodyanyuk Date: Wed, 16 Nov 2022 15:53:41 +0000 Subject: [PATCH 4/4] ETX mac-table addition --- ...-203-205-220-debug-and-information-commands-cheat-sheet.adoc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc b/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc index ce0e1eb..6c02ea9 100644 --- a/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc +++ b/cheat-sheets/RAD-ETX-203-205-220-debug-and-information-commands-cheat-sheet.adoc @@ -75,7 +75,7 @@ and another one as a sender. *show mac-table* *no mac-learning* -|Enable MAC address learning inside a flow. The _flow_ should be the one where +|Enable MAC address learning inside a flow and show the MAC table. The _flow_ should be the one where those MAC addresses are supposed to be learned, and in the appropriate direction. E.g. if the equipment of the end client is connected to ETX port `ethernet 0/10`, then you should run this command under the flow that has