update

motion-arm64/Dockerfile

@@ -0,0 +1,30 @@
+#
+# Dockerfile for motion-arm
+#
+
+FROM debian:bullseye
+MAINTAINER EasyPi Software Foundation
+
+ARG MOTION_VERSION=4.4.0
+ARG MOTION_CODENAME=bullseye
+ARG MOTION_FILE=${MOTION_CODENAME}_motion_${MOTION_VERSION}-1_arm64.deb
+ARG MOTION_URL=https://github.com/Motion-Project/motion/releases/download/release-${MOTION_VERSION}/${MOTION_FILE}
+
+RUN set -xe \
+    && apt-get update \
+    && apt-get install -y curl mosquitto-clients openssh-client \
+    && curl -sSL ${MOTION_URL} -o ${MOTION_FILE} \
+    && (dpkg -i ${MOTION_FILE} || apt-get -f install -y) \
+    && sed -i -e 's/^daemon on/daemon off/' \
+              -e 's/^webcontrol_localhost on/webcontrol_localhost off/' \
+              -e 's/^stream_localhost on/stream_localhost off/' \
+              -e 's/^output_pictures on/output_pictures off/' \
+              /etc/motion/motion.conf \
+    && rm -rf ${MOTION_FILE} /var/lib/apt/lists/*
+
+VOLUME /var/lib/motion
+WORKDIR /var/lib/motion
+
+EXPOSE 8080 8081
+
+ENTRYPOINT ["motion"]

motion-arm64/README.md

@@ -0,0 +1,102 @@
+motion-arm
+==========
+
+![](http://www.lavrsen.dk/foswiki/pub/Motion/WebPreferences/motion-trans.gif)
+
+[Motion][1] is a program that monitors the video signal from one or more cameras
+and is able to detect if a significant part of the picture has changed. Or in
+other words, it can detect motion.
+
+## docker-compose.yml
+
+```yaml
+version: "3.8"
+services:
+  motion:
+    image: easypi/motion-arm64
+    ports:
+      - "8080:8080"
+      - "8081:8081"
+    volumes:
+      - ./data/etc/motion.conf:/etc/motion/motion.conf
+      - ./data/var:/var/lib/motion
+      - /etc/localtime:/etc/localtime
+    devices:
+      - /dev/video0:/dev/video0
+    restart: unless-stopped
+```
+
+You can edit `motion.conf` to customize motion.
+
+```ini
+# set image width
+width 640
+
+# set image height
+height 480
+
+# set frame rate
+framerate 15
+
+# disable image output
+output_pictures off
+
+# disable video output
+ffmpeg_output_movies off
+
+# encode timelapse movie
+timelapse_interval 60
+timelapse_mode daily
+timelapse_fps 30
+timelapse_codec mpg
+timelapse_filename %Y%m%d-timelapse
+```
+
+Motion can work with Home-Assistant via [External Commands][2].
+
+``yaml
+binary_sensor:
+  - platform: mqtt
+    name: Motion
+    state_topic: /pi/sensor/motion
+    qos: 0
+    payload_on: ON
+    payload_off: OFF
+    device_class: motion
+```
+
+```bash
+# Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
+# To give the filename as an argument to a command append it with %f
+
+# CURL
+;on_movie_start curl -s -H 'X-HA-Access: ******' -H 'Content-Type: application/json' -d '{"state": "on", "attributes": {"friendly_name": "Motion", "device_class": "motion"}}' http://hass.easypi.pro:8123/api/states/binary_sensor.motion
+# MQTT
+;on_movie_start mosquitto_pub -h mqtt.easypi.pro -u username -P password -r -t /pi/sensor/motion -m ON
+
+# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
+# To give the filename as an argument to a command append it with %f
+
+# CURL
+;on_movie_end curl -s -H 'X-HA-Access: ******' -H 'Content-Type: application/json' -d '{"state": "off", "attributes": {"friendly_name": "Motion", "device_class": "motion"}}' http://hass.easypi.pro:8123/api/states/binary_sensor.motion
+# MQTT
+;on_movie_end mosquitto_pub -h mqtt.easypi.pro -u username -P password -r -t /pi/sensor/motion -m OFF
+```
+
+Please read [this][3] to enable raspberry pi camera module.
+
+```
+####################
+# /boot/config.txt #
+####################
+
+##Camera
+gpu_mem=128
+start_file=start_x.elf
+fixup_file=fixup_x.dat
+disable_camera_led=1
+```
+
+[1]: http://lavrsen.dk/foswiki/bin/view/Motion/WebHome
+[2]: http://www.lavrsen.dk/foswiki/bin/view/Motion/ExternalCommands
+[3]: https://wiki.archlinux.org/index.php/Raspberry_Pi#Raspberry_Pi_camera_module

motion-arm64/data/etc/motion.conf

@@ -0,0 +1,171 @@
+# Rename this distribution example file to motion.conf
+#
+# This config file was generated by @PACKAGE_NAME@ @PACKAGE_VERSION@
+# Documentation:  @prefix@/share/doc/motion/motion_guide.html
+#
+# This file contains only the basic configuration options to get a
+# system working.  There are many more options available.  Please
+# consult the documentation for the complete list of all options.
+#
+
+############################################################
+# System control configuration parameters
+############################################################
+
+# Start in daemon (background) mode and release terminal.
+daemon off
+
+# Start in Setup-Mode, daemon disabled.
+setup_mode off
+
+# File to store the process ID.
+; pid_file value
+
+# File to write logs messages into.  If not defined stderr and syslog is used.
+; log_file value
+
+# Level of log messages [1..9] (EMG, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL).
+log_level 6
+
+# Target directory for pictures, snapshots and movies
+target_dir /var/lib/motion
+
+# Video device (e.g. /dev/video0) to be used for capturing.
+videodevice /dev/video0
+
+# Parameters to control video device.  See motion_guide.html
+; vid_control_params value
+
+# The full URL of the network camera stream.
+; netcam_url value
+
+# Name of mmal camera (e.g. vc.ril.camera for pi camera).
+; mmalcam_name value
+
+# Camera control parameters (see raspivid/raspistill tool documentation)
+; mmalcam_control_params value
+
+############################################################
+# Image Processing configuration parameters
+############################################################
+
+# Image width in pixels.
+width 640
+
+# Image height in pixels.
+height 480
+
+# Maximum number of frames to be captured per second.
+framerate 15
+
+# Text to be overlayed in the lower left corner of images
+; text_left CAMERA1
+
+# Text to be overlayed in the lower right corner of images.
+text_right %Y-%m-%d\n%T-%q
+
+############################################################
+# Motion detection configuration parameters
+############################################################
+
+# Always save pictures and movies even if there was no motion.
+emulate_motion off
+
+# Threshold for number of changed pixels that triggers motion.
+threshold 1500
+
+# Noise threshold for the motion detection.
+; noise_level 32
+
+# Despeckle the image using (E/e)rode or (D/d)ilate or (l)abel.
+despeckle_filter EedDl
+
+# Number of images that must contain motion to trigger an event.
+minimum_motion_frames 1
+
+# Gap in seconds of no motion detected that triggers the end of an event.
+event_gap 60
+
+# The number of pre-captured (buffered) pictures from before motion.
+pre_capture 3
+
+# Number of frames to capture after motion is no longer detected.
+post_capture 0
+
+############################################################
+# Script execution configuration parameters
+############################################################
+
+# Command to be executed when an event starts.
+; on_event_start value
+
+# Command to be executed when an event ends.
+; on_event_end value
+
+# Command to be executed when a movie file is closed.
+; on_movie_end value
+
+############################################################
+# Picture output configuration parameters
+############################################################
+
+# Output pictures when motion is detected
+picture_output off
+
+# File name(without extension) for pictures relative to target directory
+picture_filename %Y%m%d%H%M%S-%q
+
+############################################################
+# Movie output configuration parameters
+############################################################
+
+# Create movies of motion events.
+movie_output on
+
+# Maximum length of movie in seconds.
+movie_max_time 60
+
+# The encoding quality of the movie. (0=use bitrate. 1=worst quality, 100=best)
+movie_quality 60
+
+# Container/Codec to used for the movie. See motion_guide.html
+movie_codec mp4
+
+# File name(without extension) for movies relative to target directory
+movie_filename %Y-%m-%d-%H-%M-%S
+
+############################################################
+# Webcontrol configuration parameters
+############################################################
+
+# Port number used for the webcontrol.
+webcontrol_port 8080
+
+# Restrict webcontrol connections to the localhost.
+webcontrol_localhost off
+
+# Type of configuration options to allow via the webcontrol.
+webcontrol_parms 0
+
+############################################################
+# Live stream configuration parameters
+############################################################
+
+# The port number for the live stream.
+stream_port 8081
+
+# Restrict stream connections to the localhost.
+stream_localhost off
+
+##############################################################
+# Camera config files - One for each camera.
+##############################################################
+; camera @prefix@/etc/motion/camera1.conf
+; camera @prefix@/etc/motion/camera2.conf
+; camera @prefix@/etc/motion/camera3.conf
+; camera @prefix@/etc/motion/camera4.conf
+
+##############################################################
+# Directory to read '.conf' files for cameras.
+##############################################################
+; camera_dir @prefix@/etc/motion/conf.d

motion-arm64/docker-compose.yml

@@ -0,0 +1,14 @@
+version: "3.8"
+services:
+  motion:
+    image: easypi/motion-arm64
+    ports:
+      - "8080:8080"
+      - "8081:8081"
+    volumes:
+      - ./data/etc/motion.conf:/etc/motion/motion.conf
+      - ./data/var:/var/lib/motion
+      - /etc/localtime:/etc/localtime
+    devices:
+      - /dev/video0:/dev/video0
+    restart: unless-stopped