From a8969fde99172d60b096dd65b2241de739ffe8df Mon Sep 17 00:00:00 2001
From: Emensta <114187939+EmenstaNougat@users.noreply.github.com>
Date: Sun, 25 Aug 2024 23:28:59 +0200
Subject: [PATCH] ESP32-BlueJammer by emensta

---
 README.md | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/README.md b/README.md
index 2ad3c0b..bc36ee1 100644
--- a/README.md
+++ b/README.md
@@ -61,8 +61,8 @@ If you are looking forward to purchasing a finished, working, pre-built ESP32 Bl
 
 - **Required:**  
   
-  ESP32 Dev Module (such as ESP32-WROOM-32U, any ESP32 should work as long as it has the needed pins!)
-  nRF24L01+PA+LNA (2x)
+  ESP32 Dev Module (such as ESP32-WROOM-32U, any ESP32 should work as long as it has the needed pins!)  
+  nRF24L01+PA+LNA (2x)  
   10UF capacitor (2x) any voltage above 5V  
   
   
@@ -70,19 +70,19 @@ If you are looking forward to purchasing a finished, working, pre-built ESP32 Bl
 - **Additional:**  
   
   3rd antenna:
-  IPEX to SMA-F pigtail
+  IPEX to SMA-F pigtail  
 
-If you're looking to add a battery:
-  3.7V Li-Ion battery
-  JST PH 2,0 connector
-  TP4056 Charging Module
-  3mm LED (blue)
-  4,7k Ohm resistor
-  mini slide switch
+If you're looking to add a battery:  
+  3.7V Li-Ion battery  
+  JST PH 2,0 connector  
+  TP4056 Charging Module  
+  3mm LED (blue)  
+  4,7k Ohm resistor  
+  mini slide switch  
 
-To screw the 3D printed case together you must have:
-  M3X16 screws (2x)
-  M3 Nuts (2x)
+To screw the 3D printed case together you must have:  
+  M3X16 screws (2x)  
+  M3 Nuts (2x)