From 547048d2fc4a7f0053a239b6012cebf83e9baead Mon Sep 17 00:00:00 2001 From: Emensta <114187939+EmenstaNougat@users.noreply.github.com> Date: Tue, 18 Feb 2025 15:24:16 +0100 Subject: [PATCH] ESP32-BlueJammer --- README.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index 9077820..c493623 100644 --- a/README.md +++ b/README.md @@ -66,7 +66,7 @@ For this one, all you need is listed below: **Required:** - **[ESP32 Dev Module](https://s.click.aliexpress.com/e/_onYIVKr)** (**Recommended: ESP32-32U CP2102**, any ESP32 should work as long as it has the needed pins, 38P required!) -- **[nRF24L01+PA+LNA](https://s.click.aliexpress.com/e/_oma5UQx)** (2x) (**Choose: LNANRF24**) +- **[nRF24L01+PA+LNA](https://s.click.aliexpress.com/e/_oma5UQx)** (2x) **Additional:** - **[TP4056 Charging Module (Micro-USB/Type-C)](https://s.click.aliexpress.com/e/_on7Lkvh)** @@ -82,7 +82,7 @@ For this one, all you need is listed below: This is an ESP32 with RF-module breakouts (nRF24/CC1101 etc.) for experimenting. ***Remember: It is not intended for illegal use, neither for my project!*** **Required:** -- **[nRF24L01+PA+LNA](https://s.click.aliexpress.com/e/_oma5UQx)** (2x) (**Choose: LNANRF24**) +- **[nRF24L01+PA+LNA](https://s.click.aliexpress.com/e/_oma5UQx)** (2x) Why do you need to get the nRF24's? -> the pinout can be used to connect either nRF24 or CC1101 modules for further experiments with an ESP32 chip. ![TheBlueESP](https://dwdwpld.pages.dev/theblueespwavychat.png) [Shop](https://datechlabs.com/products/the-blue-esp-pre-order) @@ -138,7 +138,7 @@ ESP32-BlueJammer tutorial by @ElMackflay ### Required: - **[ESP32 Dev Module](https://s.click.aliexpress.com/e/_onYIVKr)** (**Recommended: ESP32-32U CP2102**, any ESP32 should work as long as it has the needed pins) -- **[nRF24L01+PA+LNA](https://s.click.aliexpress.com/e/_oma5UQx)** (2x) (**Choose: LNANRF24**) +- **[nRF24L01+PA+LNA](https://s.click.aliexpress.com/e/_oma5UQx)** (2x) - **[10uF Capacitor](https://s.click.aliexpress.com/e/_oFvFeYX)** (2x) (any voltage above 5V) - **[Prototype PCB](https://s.click.aliexpress.com/e/_oBtd18j)** (at least 7x9 cm, but you will need to cut it down to fit the 3D-printed case, which fits a size of 7x5,5cm!)